Minijet Steering Wheel Hub
CAD $ 99.95
Use these hub adaptors to run our large wheel or batwing wheel on a JBS helm.
Hole Pattern
Description
Required to run our steering wheels on the JBS helm, this hub adaptor allows you to convert the proprietary steering shaft into a standard 3 or 6 bolt pattern.
The 3 hole hub was designed for our Batwing Wheel and the 6 hole bolt pattern – 6x70mm for the Round Wheel. These Steering Hubs are only required when using a JBS Helm.
Package Contains:
QTY 1 – Steering wheel hub adaptor of your choosing
Please Note:
Mounting hardware is not included.
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
| Hole Pattern | 3 Hole, 6 Hole |
You may also like…
Related products
Throttle cable kit
Most PWC throttle cables are less than 5 ft long and need to be extended to work in a boat. You can use this kit to fabricate your own cables and cable housings with custom lengths to suit your boat. This kit includes a variety of parts necessary to fit different donors, throttle bodies, throttle levers, etc.
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
We also offer this as part of a complete Minijet Steering Kit.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
