Throttle cable kit
CAD $ 100.00
Most PWC throttle cables are less than 5 ft long and need to be extended to work in a boat. You can use this kit to fabricate your own cables and cable housings with custom lengths to suit your boat. This kit includes a variety of parts necessary to fit different donors, throttle bodies, throttle levers, etc.
Available on backorder
Description
What’s included:
- 16ft SS cable 1.5mm
- 16ft Teflon lined outer cable housing
- 2x cable end caps 5mm ID x 6.5mm OD
- 1x cable end cap 5mm ID x 5.5mm OD
- 1x cable adjuster M6
- 1x cable adjuster M8
- 2x 6mm cable end (solderless)
- 2x 6mm x 10mm cable end
- 2x 6mm x 8mm cable end
- 1x 5.5mm x 7.5mm cable end
- 1x 6mm ID x 8mm OD x 9mm plastic cable end adapter
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 30 × 30 × 3 cm |
Related products
Trim / Reverse Control Cable
Trim / Reverse control cables for use in various hulls.
- Cables are available in different lengths with 1ft length increments.
- Cables lengths are measured from the tip of each threaded end.
- Cables use a 1/4″-28UNF thread, suitable for use with our threaded trim and reverse cable ends and cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
We also offer this as part of a complete Minijet Steering Kit.
Yamaha Wiring Harness Extension
Simply extend the cockpit controls of your Yamaha powered mini boat with our wiring harness extension!
INSTRUCTIONS
- Use the FIRST selection field to REMOVE any 'default' connectors that are not applicable to you
- Use the SECOND selection field to ADD any alternate or extra connector extensions
Please CONTACT US if you have any additional questions or need assistance selecting the appropriate connectors.
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Minijet Foot Throttle
Durable solid-aluminum throttle pedal available with different throttle cable travel lengths.
This pedal is compatible with 3300 series push-pull control cables - suitable for large engine installation. For all PWC engine installations we recommend using our standard throttle cable kit and attaching it in place of a 3300 series cable.
Please note: We do not keep this item in our regular stock, and each foot throttle is custom made to order. We will confirm an approximate lead time for each foot throttle when an order is placed. By placing an order for a foot throttle you acknowledge that this product is a custom piece and cannot be canceled or refunded.
