Yamaha Angled Isolators
CAD Price range: $ 70.00 through $ 250.00
Conveniently re-use your OEM engine brackets and switch to these angled isolators.
Description
Manufactured to OEM standards and designed with a wider footprint these isolators are sure to stand up equally as well if not better to the units you’re replacing.
Package Contains:
QTY (specified) – OEM quality angled rubber isolator
Please Note:
Mounting hardware is not included.
Minijet engine shims are not be compatible with this product – custom shims must be fabricated to suit this application.
Additional information
| Weight | 0.35 kg |
|---|---|
| Dimensions | 17 × 9 × 7 cm |
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Heat Exchanger
This product is on backorder, with no planned fulfillment date from our supplier. Please see our other heat exchanger product offerings instead.
For engines with 60 HP to 270 HPÂ we recommend This Alternative Product
For engines with 300+ HP we recommend This Alternative Product
Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.
Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s)
Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)
Fittings included are:
2x 3/4 inch NPT to 1 inch barb
2x 3/4 inch NPT to 3/4 inch barb
Blower Hose (3in diameter, 4ft length)
Blower hose is also available as part of our complete blower kit.
Custom lengths are available, please contact us.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
Attwood / Seachoice 3-inch Engine Compartment Bilge Blower
Water Resistant Turbo In-line Bilge Blower (12v, 120 CFM) with ducting. We also sell this blower in a kit with a through-hull aluminum baffled vent and everything you need for installation.
