Heat Exchanger
CAD $ 495.00
This product is on backorder, with no planned fulfillment date from our supplier. Please see our other heat exchanger product offerings instead.
For engines with 60 HP to 270 HP we recommend This Alternative Product
For engines with 300+ HP we recommend This Alternative Product
Heat exchanger for closed cooled Seadoo and small car motors. End caps are removable for easy winterizing and for cleaning out debris. Each end cap can be rotated and fastened in multiple orientations at 90 degree intervals to facilitate optimal hose management.
Glycol flows through 2 center fittings (1 inch hose size on Sea-Doo’s)
Lakewater flows through two brass end caps (3/4 inch hose size on Sea-Doo’s)
Fittings included are:
2x 3/4 inch NPT to 1 inch barb
2x 3/4 inch NPT to 3/4 inch barb
Out of stock
Additional information
| Weight | 6 kg |
|---|---|
| Dimensions | 50 × 14 × 14 cm |
You may also like…
Related products
Bilge Hose (1-1/8in diameter, 6ft length)
This bilge hose is ideal for routing your bilge water out of your hull, and it is designed to work with our automatic bilge pump and hull bypass fittings.
Bilge hose has a 1-1/8in diameter and is sold in 6 foot lengths. Most boats use between 4ft and 6ft of hose. For custom length please contact us.
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
Traditional SSS Sand Trap
Traditional style jetboat sand trap. Some users prefer this sand trap because it is less prone to clogging, however it does allow some particulate matter into the cooling loop.
Our Minijet Sand Trap Kit uses a filter element that is easily removeable for cleaning, and removes more particulate matter.
Attwood / Seachoice 3-inch Engine Compartment Bilge Blower
Water Resistant Turbo In-line Bilge Blower (12v, 120 CFM) with ducting. We also sell this blower in a kit with a through-hull aluminum baffled vent and everything you need for installation.
