Throttle cable kit
CAD $ 100.00
Most PWC throttle cables are less than 5 ft long and need to be extended to work in a boat. You can use this kit to fabricate your own cables and cable housings with custom lengths to suit your boat. This kit includes a variety of parts necessary to fit different donors, throttle bodies, throttle levers, etc.
Available on backorder
Description
What’s included:
- 16ft SS cable 1.5mm
- 16ft Teflon lined outer cable housing
- 2x cable end caps 5mm ID x 6.5mm OD
- 1x cable end cap 5mm ID x 5.5mm OD
- 1x cable adjuster M6
- 1x cable adjuster M8
- 2x 6mm cable end (solderless)
- 2x 6mm x 10mm cable end
- 2x 6mm x 8mm cable end
- 1x 5.5mm x 7.5mm cable end
- 1x 6mm ID x 8mm OD x 9mm plastic cable end adapter
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 30 × 30 × 3 cm |
Related products
Trim / Reverse Control Cable
Trim / Reverse control cables for use in various hulls.
- Cables are available in different lengths with 1ft length increments.
- Cables lengths are measured from the tip of each threaded end.
- Cables use a 1/4″-28UNF thread, suitable for use with our threaded trim and reverse cable ends and cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.
Steering Cable
Steering cables for use in various hulls.
- Cables are available in different lengths with 1ft length increments.
- Cables lengths are measured from the tip of each threaded end.
- Cables use a 5/16"-24UNF thread, suitable for use with our threaded steering cable ends and steering cable extension kits.
We do our best to keep a stock of common sizes and other less common sizes are available as a special order with an extended lead time.
Universal Cable Finger Throttle Lever for M8 Barrel Adjustor
This product is currently back-ordered. We recommend purchasing Cable Finger Throttle Control Lever for M8 Barrel Adjustor - Can be made to fit our Large Steering Wheel with minor modifications to the wheel.
This universal cable finger throttle lever is designed to fit a wide variety of; applications, handlebars, and engines.
With 35mm of available cable travel, this throttle lever will out-pull and out-perform all other options in the market. The adjustable mounting point and mounting clamps allow users to adjust the position and angle of the lever on the steering wheel. Mounting clamps are available to fit standard 7/8" handlebars, or larger round style steering wheels.
Please choose from one of the mounting clamp options listed below.
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
We also offer this as part of a complete Minijet Steering Kit.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
