Yamaha Angled Isolators
CAD Price range: $ 70.00 through $ 250.00
Conveniently re-use your OEM engine brackets and switch to these angled isolators.
Description
Manufactured to OEM standards and designed with a wider footprint these isolators are sure to stand up equally as well if not better to the units you’re replacing.
Package Contains:
QTY (specified) – OEM quality angled rubber isolator
Please Note:
Mounting hardware is not included.
Minijet engine shims are not be compatible with this product – custom shims must be fabricated to suit this application.
Additional information
| Weight | 0.35 kg |
|---|---|
| Dimensions | 17 × 9 × 7 cm |
Related products
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
HD Battery Retainer Strap Pair
Much stronger and slightly shorter than OEM straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
These straps can be added to the Minijet Battery Box incase your donor PWC does not have OEM straps to use.
(Battery Box sold separately).
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
