Yamaha Finger Throttle Adapter Kit
CAD $ 240.00
Re-locate your bulky OEM electronic Yamaha finger levers!
Description
This kit allows you to conveniently re-locate your OEM electronic Gen 1 (2012-2021) Yamaha finger levers and run your preferred cable throttle directly on your steering wheel – no more bulky and awkward finger levers!
Package Contains:
QTY 1 –Â Cable Hardware Kit
QTY 1 – 3 ft Throttle Cable
QTY 1 – 3 ft Throttle Cable Sheath
QTY 1 – Yamaha Electronic Throttle Bracket
QTY 1 – Finger Throttle Lever (for batwing or round wheel based on selection)
Please Note
Mounting hardware is not included
2 Kits are required for combined RiDE & throttle applications
We recommend using a high silver content solder and flux to make a permanent connection on one side of the inner cable with the supplied ends. Solder and flux are not included.
Additional information
| Weight | 0.68 kg |
|---|---|
| Dimensions | 18 × 15 × 8 cm |
Related products
Throttle cable kit
Most PWC throttle cables are less than 5 ft long and need to be extended to work in a boat. You can use this kit to fabricate your own cables and cable housings with custom lengths to suit your boat. This kit includes a variety of parts necessary to fit different donors, throttle bodies, throttle levers, etc.
Minijet Steering Helm
The Minijet steering helm is made in house and features a short steering ratio with 90 degrees of rotation between the integrated steering end stops. This quick ratio allows for quick and agile maneuvering, without having to take your hand off the wheel when turning.
The Minijet steering helm can be configured to suit left or right side driving positions, and will work with all PWC and aftermarket jet nozzles. The steering column can also be adjusted forward and aft to suit different driver positions.
The Minijet steering helm Includes:
- Minijet steering column with integrated steering wheel adapter, and cable pass-through
- Stainless steel steering bearings and steering bearing mount plates to attach to dash area
- Steering cable mounting plate
- Steering cable actuator arm with integrated steering stops
- Steering cable connection hardware
- Helm installation hardware
We also offer this as part of a complete Minijet Steering Kit.
JBS Tilt Steering Helm
The JBS tilting steering helm offers an adjustable steering wheel position. This helm can tilt the steering wheel 42 degrees upwards, and 6 degrees downward for different drivers.
Our JBS tilt steering helm provides 135 degree of steering wheel angle between the steering travel stops. Our JBS tilt steering helm will require a steering wheel hub adapter (3 hole adapter for Batwing style steering wheel or 6 hole for a round wheel)
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
Minijet Foot Throttle
Durable solid-aluminum throttle pedal available with different throttle cable travel lengths.
This pedal is compatible with 3300 series push-pull control cables - suitable for large engine installation. For all PWC engine installations we recommend using our standard throttle cable kit and attaching it in place of a 3300 series cable.
Please note: We do not keep this item in our regular stock, and each foot throttle is custom made to order. We will confirm an approximate lead time for each foot throttle when an order is placed. By placing an order for a foot throttle you acknowledge that this product is a custom piece and cannot be canceled or refunded.Â
