Yamaha Engine Mounts
CAD $ 375.00
Designed for mounting 1800cc Yamaha engines. These engine mounts are designed to work with common stringer interfaces on all Minijet A2 series hulls. This mount assembly replaces the OEM cast engine mounting brackets that are attached to the engine block, and they allow you to reuse the OEM straight rubber isolator mounts.
Please note, these motor mounts are provided as a tack-welded kit. They are pre-assembled in the correct orientation to work with most engines. You must confirm this orientation and complete the remaining welding work before installing these mounts.Â
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Minijet Cold Air Intake Kit
The Minijet Cold-Air intake with filter is a great way to make sure your engine is getting clean air. This kit is available in 3 inch or 4 inch tubing diameters to suit different engines.
This kit includes:
- Vibrant classic air filter with SS hose clamp
- Air filter mounting tube
- 3ft of Canaflex semi-rigid air hose
- QTY 2 stainless steel hose clamps
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.
Blower Hose (3in diameter, 4ft length)
Blower hose is also available as part of our complete blower kit.
Custom lengths are available, please contact us.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
