Minijet Sea-Doo Coolant Reservoir Mount
CAD $ 40.00
The Minijet Sea-Doo coolant reservoir mount allows you to re-home your cooling bottle with no existing mounting features.
Coolant Reservoir Type
Description
The Minijet coolant reservoir mount allows the coolant reservoir (with no standard mounting features) to be mounted in a convenient location within your boat.
The “Flask – Gen 1” coolant reservoir is mount is to be used with BRP/Sea-Doo part 276000086
The “Whistle – Gen 2” coolant reservoir is mount is to be used with BRP/Sea-Doo part 276000265
The “Ball – Gen 3” coolant reservoir is mount is to be used with BRP/Sea-Doo part 509000802
The “Kidney – Gen 4” coolant reservoir is mount is to be used with BRP/Sea-Doo part 276000419
Package Contains:
QTY 1 –Â Coolant reservoir mount bracket
Please Note:
Please note the corresponding coolant bottle and mounting hardware are not included.
Additional information
| Weight | 0.4 kg |
|---|---|
| Dimensions | 18 × 14 × 8 cm |
| Coolant Bottle Type | Flask – Gen 1, Whistle – Gen 2, Ball – Gen 3, Kidney – Gen 4 |
Related products
Automatic Bilge Pump Kit (Includes Hull Fitting, Hose and Mounting plate)
1100 Gallon per hour Bilge Pump and Mounting Plate for Minijet Avenger box-stringers. Minijet Hull Fitting and 6 ft of bilge hose.
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.
Minijet Yamaha RiDE Relocate Kit
Our Minijet Yamaha RiDE Relocate Kit allows you to maintain the OEM trim and reverse functions of the Yamaha RiDE system, while relocating the motor inboard on your boat.
Minijet Yamaha RiDE Relocate Kit Includes:
- motor and cable mounting plate
- QTY 2 6-foot trim and reverse cables
- QTY 2 trim and reverse cable ends
- QTY 2 trim and reverse cable extension kits
- QTY 2 4300 Series Cable Mounting Clamps
- QTY 2 4300 Series Cable Mounting Spacers
This kit does not include the Yamaha RiDE Motor, trim nozzle, or reverse bucket. This equipment is re-used from your donor PWC.
This kit is sold as a set of cut and pre-bent pieces. Customer must assemble components, weld all necessary connections, and determine cable mounting and cable routing.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
