Yamaha Fuel Pump Weld-In Ring
CAD $ 30.00
Easily install a Yamaha PWC fuel pump into your custom fuel tank!
Description
Easily install your Yamaha PWC fuel pump into a custom fuel tank with our Fuel Pump Weld-In Ring.
Simply weld the ring into your tank and tap the pre-piloted holes for studs or bolts to install your pump hat.
Please Note:
Fabricated and welded fuel tanks may be subject to inspection, testing, and mounting requirements in your local area. It is your responsibility to ensure that your tank complies with the rules and recommendations that apply to your jurisdiction.
Mounting hardware is not included.
Additional information
| Weight | 0.25 kg |
|---|---|
| Dimensions | 17 × 17 × 1 cm |
Related products
Minijet Cold Air Intake Kit
The Minijet Cold-Air intake with filter is a great way to make sure your engine is getting clean air. This kit is available in 3 inch or 4 inch tubing diameters to suit different engines.
This kit includes:
- Vibrant classic air filter with SS hose clamp
- Air filter mounting tube
- 3ft of Canaflex semi-rigid air hose
- QTY 2 stainless steel hose clamps
Minijet Electric Trim Actuator Kit
The Minijet Electric Trim Actuator Kit includes a 12v Electric Linear Actuator, 2 control relays, 6ft Trim Cable, Cable End, Cable Extension, Mounting Plate, Cable Travel Arm, Cable Mounts and Installation Hardware.
This kit will still require Momentary Switches which we sell separately.
HD Battery Retainer Strap Pair
Much stronger and slightly shorter than OEM straps which takes away the slack when using aftermarket batteries. 10 inches total length (hook to hook).
These straps can be added to the Minijet Battery Box incase your donor PWC does not have OEM straps to use.
(Battery Box sold separately).
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
Traditional SSS Sand Trap
Traditional style jetboat sand trap. Some users prefer this sand trap because it is less prone to clogging, however it does allow some particulate matter into the cooling loop.
Our Minijet Sand Trap Kit uses a filter element that is easily removeable for cleaning, and removes more particulate matter.
