Sea-Doo Impeller Spacer
CAD $ 25.00
17 in stock (can be backordered)
Description
Optional spacer for Sea-Doo impellers.
In 2004, Sea-Doo released its 159mm pump system. This new pump system was installed in various; 215hp, 255hp, and 260hp Sea-Doo models from 2004 to 2007. In 2008 Sea-doo made a mid-season change to the mounting interface for the impeller in the 159mm pump system. This new mounting interface included an additional counterbore on the back side of the impeller. This new counterbored mounting interface was used on all Sea-Doo models from 2009 to current.
This impeller spacer fills the counterbore on the newer style of impellers, allowing newer style 159mm impellers to be used in the older style pump and stator housings.
If you are using a 159mm pump, impeller, and stator housing from the 2008 Sea-Doo model year we strongly recommend that you disassemble and check this interface prior to ordering replacement impellers. Unfortunately there is no way to tell which particular models of Sea-Doo received which style of impeller interface during this year of mixed production.
Additional information
| Weight | 0.1 kg |
|---|---|
| Dimensions | 5 × 5 × 1 cm |
Related products
Southern Jet Nozzle
Trimmable Posi Nozzles for all major PWC brands.
These increase thrust in corners as the design does not allow for a loss of thrust out the side of the nozzle. With the huge range of trim you can also be on plane faster and gain a higher top speed. Not to mention the awesome rooster tail!
These are a direct fit to most PWC. If you have any questions on fitment don't hesitate to contact us before ordering.
PLEASE NOTE: This product is no longer stocked. The units listed here represent the final remaining inventory. Please ensure your donor model is compatible with the unit you are ordering. If your donor model is not listed as in stock, please order the new and improved  Minijet Posi Nozzle
Reverse Bucket for Southern Jet Nozzle
Make docking and trailering a breeze with this universal cast ducted reverse bucket for improved reverse thrust and precise directional control. Most PWC reverse buckets catch the water and often spill it out the sides and top without redirecting the thrust to make the boat go backwards. This reverse bucket redirects the flow of the jet back under the boat on each side of the jet unit. By doing so it also improves directional control since you can steer the flow of water down each duct individually.
This reverse bucket is machined to fit our trimmable posi nozzle (sold separately).
Reverse bucket package includes:
- QTY 1 cast reverse bucket
- QTY 2 Stainless Steel Pivot Bushings
- QTY 2 Stainless Steel Mounting Bolts
- QTY 2 Stainless Steel Split Locking Washers
If you have any questions on fitment don't hesitate to contact us before ordering.
Sea-Doo Stator Housing
Stator housing for Sea-Doo 155mm, 159mm, and 161mm impellers. This stator housing includes a plastic wear ring, new stator shaft and bearings, and a new tail cone. Install your impeller, bolt it into your boat, and go boating!
Due to the many variations in part# available for this we have opted not to list each and every option with associated stock levels. We do our best to stock each possible combination, however if you need this in a rush please contact us to confirm your application and stock status prior to ordering.
