Clamcleat CL205
CAD $ 30.00
This cam rope cleat can be used to fasten lines on your boat.
- Suitable for 3/8 – 5/8 inch diameter lines
- Suitable for 10 – 16mm diameter lines
- Can be fastened with suitable 5/16 inch diameter bolts or screws
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Minijet Bilge Pump Mounting Plate
The Minijet bilge pump mounting plate simplifies the mounting and installation of automatic bilge pumps in all compatible Minijet hulls and stringers. The bracket recesses the bilge pump into the stringer cavity, placing the pump pickup at the lowest possible spot in the bilge. Pump mounting holes and are pre-drilled and ready for suitable rivets.
We also offer this mounting plate as part of a complete bilge-pump kit.
Traditional SSS Sand Trap
Traditional style jetboat sand trap. Some users prefer this sand trap because it is less prone to clogging, however it does allow some particulate matter into the cooling loop.
Our Minijet Sand Trap Kit uses a filter element that is easily removeable for cleaning, and removes more particulate matter.
Attwood / Seachoice 3-inch Engine Compartment Bilge Blower
Water Resistant Turbo In-line Bilge Blower (12v, 120 CFM) with ducting. We also sell this blower in a kit with a through-hull aluminum baffled vent and everything you need for installation.
