Bow Eye – Weld On
CAD $ 15.00
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.
This product is on backorder. Please see our other weld-on eyelet offerings instead.
For bow eyes we recommend This Alternative Product
For general tie downs we recommend This Alternative Product
Out of stock
Description
Weld on single hole aluminum bow-eye/transom-tie.
Suitable for connecting bow-lines or trailer to the bow or transom of the boat.
Package Contains:
QTY 1 – Cast aluminum bow eye
Please Note:
This product must be welded and is not suitable for a bolted installation.
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 11 × 6 × 3 cm |
You may also like…
Bow Eye (2 Hole) – Weld On
Attach this bow eye onto your boat to connect bow-lines or trailer hooks to your boat.
This product is on backorder. Please see our other weld-on eyelet offerings instead.
For bow eyes we recommend This Alternative Product
For general tie downs we recommend This Alternative Product
Related products
Minijet Sand Trap kit
Protect your motor’s cooling ducts from sand and other sediment by adding this inline filter to collect it.
Spiraling action allows debris to collect in the bottom of the clear bowl with the clean water passing through the mesh in the top. Even if the bowl fills up it will not allow debris into you motor.
Easily monitor the clear bowl at a glance and clean it when needed by unscrewing the clear bowl from the filter and opening the included valve to let dirt out back into the river.
Please choose what size Hose-barb is best fitted for your machine.
Aerator Spray Head
An Aerator Spray Head to better oxygenate the water in a Bait/live-well.
Rule RM1100B Automatic Bilge Pump
Our go-to fully automatic bilge pump takes the hassle and guesswork out of keeping your boat dry and safe! The Rule RM1100B features a built in water sensor that eliminates the need for a separate float switch and extra wiring. The pump also has built in programming that can turn off the pump when it pump is running but not pumping water to protect the pump, and batteries.
- Capacity: 1,100 GPH
- Volts: 12VDC
- Amperage: 3.8 amp draw at maximum flow
- sold with straight fitting adapters for 1" and 1-1/8" hose.
- sold with snap on strainer that allows for easy cleaning and mounting.
We also offer this in a Bilge Pump Kit with hose, aluminum fitting and Stringer Mounting Plate.
Traditional SSS Sand Trap
Traditional style jetboat sand trap. Some users prefer this sand trap because it is less prone to clogging, however it does allow some particulate matter into the cooling loop.
Our Minijet Sand Trap Kit uses a filter element that is easily removeable for cleaning, and removes more particulate matter.
